|
60 Series End Mount NEMA 2 |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 2, CSA 2, IP41
Construction: Aluminum / Stamped Steel |
|
|
|
|
| Available Options |
|
60 Series End Mount NEMA 4 NON-TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4, CSA 4, IP56
Construction: Aluminum / Stamped Steel or all Cast Iron
WITHOUT hub seal for NON-TEFC applications
|
|
|
|
|
| Available Options |
|
60 Series End Mount NEMA 4 TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4, CSA 4, IP56
Construction: Aluminum / Stamped Steel or all Cast Iron
WITH hub seal for TEFC applications |
|
|
|
Outline
Drawing Stamped Steel
Outline
Drawing Cast Iron |
| Available Options |
|
60 Series End Mount NEMA 4X NON-TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4X, CSA 4, IP56
Construction: Cast Iron with FDA Approved White Epoxy Paint
WITHOUT hub seal for NON-TEFC applications |
|
|
|
|
| Available Options |
|
60 Series End Mount NEMA 4X TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4X, CSA 4, IP56
Construction: Cast Iron with FDA Approved White Epoxy Paint
WITH hub seal for TEFC applications |
| Outline
Drawing Cast Iron |
|
|
|
| Available Options |
|
60 Series End Mount NEMA 4X STAINLESS STEEL NON-TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4X, CSA 4, IP56
Construction: Stainless Steel
WITHOUT hub seal for NON-TEFC applications |
|
|
|
|
| Available Options |
|
60 Series End Mount NEMA 4X STAINLESS STEEL TEFC |
Torque ratings 1.5 - 25 lb.ft.
Enclosure: NEMA 4X, CSA 4, IP56
Construction: Stainless Steel
WITH hub seal for TEFC applications |
|
|
|
|
| Available Options |
